PF30-386 for long spindle 30mm cranks
This bottom bracket fits most 30mm crank spindles on a PF30 frame. It moves the bearings out of the frame in order to make a wider and stiffer set up. Bearing wear is greatly reduced with this wider set up compared to a standard PF30 setup with spacers. Fits Rotor 30mm, RaceFace Cinch, Easton, 386EVO, BB30. Campagnolo Over Torque.
Choose road bearings for road bikes, cross bearings for mountain bikes and cyclocross. Cranks that will not fit with this bottom bracket: traditional (pre 2014) BB30 cranks with short spindles and Specialized FACT. For these cranks, please have a look at our PF30 bottom bracket
Ball bearings are wear items, similar to the chain on your bicycle. While we went out of our way to present you with the best possible product, your Kogel Bearings do require some maintenance and a new seal kit from time to time. Please download this service document from our manuals section for a step by step on how to keep your bearings running smoothly.
Kogel Bearings strives for best-in-industry product support. Our hybrid and full ceramic bearings are covered under our 1+1 year warranty, which guarantees that we will keep you on the road for two years, pending on annual bearing service. Read more about our philosophy in this blog post.